As we continue our series on headlight bulb upgrades, it’s time to discuss electrical interference. Just as in the previous article on spectral content, this is an issue that very few retailers or manufacturers check for or discuss. While these considerations don’t affect the performance of your lighting system, they can significantly affect the performance […]
Car Audio Crossover Slopes, Alignments and Summing
Car audio upgrades are much more complex than setting up speakers in your living room. They are, unless all you have in the system is a set of coaxial speakers in your doors. Your installer has to consider crossover slopes and alignments if you have front and rear speakers and a subwoofer. They must also […]
Headlight Bulb Upgrades: Part 3: Beam Patterns
We are back with the third article in our series about headlight bulb upgrades. In the first article, we discussed the many different headlight bulb designs and how they’ve advanced over the last century. The second article in the series explained the terminology used when discussing light sources. How a light assembly projects light onto […]
Car Audio Myth: Larger or More Subwoofers Are Always Louder
There’s a common belief that an audio system with more subwoofers will produce more bass. This statement can be 100% true or completely false. Why might it be false? A subwoofer’s output depends heavily on enclosure design. Let’s look at two examples where the output of one subwoofer is more than two. The Most Bass […]
Revisiting Sealed Subwoofer Enclosure Stuffing with SPL Measurements
A while back, we looked at how adding stuffing to a sealed enclosure affects its performance. It was clear from our measurements that the addition of Dacron lowered the system’s Qtc (Total Q). The original theory was that adding stuffing made the enclosure seem larger and let the driver play louder at low frequencies. Let’s […]
